| CPU Series | Compatible? | Notes | | :--- | :--- | :--- | | (non-K) | ✅ Yes | Best performance for this board. K-series (overclocking) is wasted; BIOS locks OC. | | Core i5-4570 / 4670 | ✅ Yes | Sweet spot for price/performance. | | Core i3-4130 / 4330 | ✅ Yes | Good for office/basic builds. | | Xeon E3-12xx v3 | ⚠️ Limited | Some v3 Xeons work, but iGPU is disabled. HP BIOS may throw a microcode error. Not officially supported. | | Pentium / Celeron G-series (Haswell) | ✅ Yes | Low power, low performance. | | K-series (e.g., i7-4770K) | ❌ No point | Chip fits, but you cannot overclock due to HP’s locked BIOS. |
This draft is structured for a blog post, knowledge base, or repair guide. It targets users who need to upgrade, replace, or repurpose this specific OEM board (commonly found in HP EliteDesk 800 G1 towers). Meta Description: Upgrading or replacing your HP 2B4B motherboard? We cover CPU compatibility (Haswell), RAM limits, PSU wiring, case fitment, and BIOS whitelists. Avoid costly mistakes. 1. Introduction: What is the HP 2B4B? The HP 2B4B is the proprietary motherboard found inside the HP EliteDesk 800 G1 series (Tower, Small Form Factor, and Microtower). This is a business-class board built around Intel’s 4th generation Haswell architecture (LGA 1150 socket).
| Form Factor | PSU Connector | Standard ATX Adapter Required? | | :--- | :--- | :--- | | | Proprietary 6-pin (mobo) + 4-pin (CPU) | ✅ Yes (HP to ATX 24-pin adapter cable) | | Small Form Factor (SFF) | Proprietary slim PSU | ❌ No – must replace with exact HP SFF PSU | | Microtower (MT) | Same as Tower | ✅ Yes |
Before buying a replacement or upgrading components, understand this: Compatibility is dictated by HP’s strict BIOS and physical form factors. 2. CPU Compatibility (LGA 1150) The 2B4B supports only Intel 4th gen (Haswell) CPUs. It does not support 5th gen (Broadwell) or 3rd gen (Ivy Bridge).
Buy an “HP proprietary to standard ATX 24-pin adapter” (e.g., from COMeap or ModDIY). Then you can use any quality standard PSU (e.g., Corsair, EVGA).